Point planning method for factory/park monitoring system

1. Perimeter

• Physical fence: 1 infrared security camera every 40 to 60 meters, humanoid detection and filtering of small animals.
• No wall or fence perimeter: dense distribution or use of electronic fence + video review.
• Key considerations: areas close to rivers, villages, and areas with climbing objects.
• Coordinate with sound and light alarms and broadcast announcements.

2. Entrance and exit

• Truck passage: license plate recognition + barrier gate + weighbridge, equipped with fill light (special machine for license plate recognition).
• Personnel channel: Face/card swipe gate, connected to the attendance system.
• Configure 1 panoramic camera to record the overall situation of vehicles and personnel.
• Consider the separation of people and vehicles to avoid mixed traffic.

3. Park roads

• One station every 30 to 50 meters on the main road, and must be installed at intersections.
• Focus on coverage of blind spots, curves, and reversing areas.
• Must be installed at the intersection of forklift passage and pedestrian passage.
• A ball machine can be used for cruising.

4. Production workshop

• The main passages, entrances and exits are fully covered, and the workstation area is determined according to management needs.
• Hazardous chemicals area, high temperature and high pressure area: set up intrusion detection and sound and light alarm.
• Select IP66/IP67 and anti-corrosion equipment for dusty and corrosive environments.
• Optional: safety helmet/workwear identification, off-duty detection.

5. Warehouse and Logistics

• The entrance and exit of the warehouse must be set up to record the flow of materials.
• The shelf aisles are arranged at intervals of 15 to 25 meters, and attention is paid to the obstruction of high-rise shelves.
• Separately arrange high-value material areas and extend the video storage period.
• Platform/loading and unloading area: The entire process is videotaped, and cargo damage disputes can be traced.

6. Key areas

• Financial room, computer room, hazardous chemicals warehouse, power distribution room: independent storage + stricter permissions.
• Monitoring center: covering operation console and access control.
• Canteen/restaurant: can be connected to a bright kitchen and a bright stove.

Design points

1. First outPoint map: Mark each point, coverage, and focal length on the floor plan.
2. On-site survey and confirmation: shielding, power acquisition, network access, and pole position.
3. Tiered design: which areas are 90 days and which are 30 days.
4. Reserve 15% to 20% point margin to facilitate later expansion.
5. Coordinate and consider linkage with access control, alarm, fire protection, and broadcasting systems.

Common Omissions

• Only cover the interior, ignoring the perimeter and roof.
• Shelves high in the warehouse form a large blind area.
• The loading dock does not have a separate forensic camera.
• Night lighting was not considered, resulting in a large number of points failing at night.
• There is no channel or power supply reserved for maintenance.