Internet monitoring and renovation project for 46 branches of a commercial bank
In accordance with financial industry standards, the branch counters’ dual-channel video recording, ATM cabin pinhole monitoring and treasury control upgrades were completed, and branch-level networking and remote off-site inspections were implemented.
Project Overview
Project basic information
project site
Real scene of project site
Project background
The bank has 46 branches and 12 off-site self-service banks within its jurisdiction. The original system exists There are three outstanding problems: single evidence collection at the counter, separate branches, and reliance on on-site inspections.
Rolling implementation method
Completed 46 outlets in 110 days, relying on "Standardized package + single store closing in one day for renovation":
- Package and number the equipment, brackets, and wires required for each outlet in advance.
- The construction team will enter the site after the outlet closes and will complete and clear the site before opening the next day.
- Remotely accept the screen angle, and adjust it twice that night if it fails.
- After completion, all outlets will be unified and connected to the branch platform.
Compliance and efficiency
After the transformation, all outlets will meet the video recording period requirements of the financial industry. The average time for branch off-site inspections has been shortened from 2 working days to less than 4 hours.
Project difficulties
Issues that need to be addressed during project advancement
The outlets are open all year round, and construction cannot interrupt business
Renovations must be completed outside business hours and resumed on the same day
Counting money at the counter and the customer's face need to be collected at the same time
A single perspective cannot take care of both at the same time
The ATM cabin has a small space and low illumination at night
Conventional equipment cannot be installed and imaged
Branches lack remote off-site inspection methods
Compliance inspections rely on on-site inspections
solution
Technical and construction measures taken to address the above difficulties
The counter uses dual cameras on the front of the customer + the money counting table
the two-channel images are synchronized to synthesize the video
The ATM cabin uses a miniature pinhole camera + sound pickup
concealed installation, infrared imaging at night
Double-check detection in the vault area + double-entry linkage
alarm and video mark if double-person swipe card is not pressed to enter
Remote off-site inspection on branch network platform
Search and export by branch, channel, time period
Project results
Actual operating data after the system goes online
Main equipment list
This project mainly uses equipment (XLD is mainly self-developed)
- 120dB wide dynamic network hemisphere — 386 stations, lobby and counter
- Special cameras for money counting desks — 276 units, counter operation evidence collection
- Micro pinhole camera — 96 pieces, ATM cabin
- High sensitivity pickup — 488 pieces, counter and ATM
- 64-channel NVR — 46 units, local network + branch backup
Related solutions
Other cases
More similar project implementation experience
